Installation and Upgrades

Visit the Sentinel LDK download page for the most recent versions of Sentinel LDK software and embedded documentation.

>Upgrading an Earlier Version of Sentinel LDK

Installing Linux and Macs Packages

Sentinel LDK files required for Linux and Mac platforms are available on the machine where Sentinel LDK for Windows is installed, under the following path:

%ProgramFiles(x86)%\Thales\Sentinel LDK\Additional Platforms\

Alternatively, you can download the relevant packages directly from the Thales website:

>Linux: https://supportportal.thalesgroup.com/csm?id=kb_article_view&sys_kb_id=1d6107451b05d050f12064606e4bcbb0&sysparm_article=KB0021880

>Mac: https://supportportal.thalesgroup.com/csm?id=kb_article_view&sys_kb_id=fc624f891b05d050f12064606e4bcb4e&sysparm_article=KB0021881

Upgrading an Earlier Version of Sentinel LDK

Instructions for upgrading from earlier versions of Sentinel LDK can be found in the Sentinel LDK Installation Guide.

Considerations when upgrading Sentinel LDK:

> When upgrading to Sentinel LDK 10.0 from Sentinel LDK v.7.3 through v.7.8, all non-English locales of Customer contacts and Channel Partner contacts in Sentinel LDK-EMS are converted to the English locale. If this issue is applicable to your installation of Sentinel LDK-EMS, make sure to read this technical note before upgrading to Sentinel LDK 10.0.

NOTE You can ignore this issue if all of your Customer contacts and Channel Partner Contacts are set up to use the English locale or if you are not upgrading Sentinel LDK-EMS.

> The procedure for upgrading to Sentinel LDK 10.0 has been tested only for Sentinel LDK v.8.3 and later.

If you plan to upgrade from an earlier version of Sentinel LDK, please contact Technical Support to validate the upgrade scenario. (This applies whether you are upgrading Sentinel LDK Vendor Tools, Sentinel LDK-EMS, or both.)